Raven X - Telus EV-DO Airlink Cellular Modem
Serial Protocols:
AT Commands, PPP, SLIP, UDP, TCP
Serial Interface:
RS-232, DB9-F
Ethernet Interface:
10/100 Mbps RJ-45
RF Antenna Connectors:
50 Ohm SMA
Status
LED’s:
Network, Signal, Activity, Service and
Power
Dimensions:
116mm x 35mm x 63mm
Weight:
<1
lb
(<0.5
kg)
2.2
Base Station Requirements
•
Pc with active internet connection, running Campbell
Scientific Loggernet or PC400 software
•
Subsription to the Telus EV-DO Network with coverage at the
Datalogger site
2.3
Datalogger Site Equipment
Raven X - Telus modem—includes DC power cable. The
modem is configured using the Telus Setup Wizard and Ace
Manager prior to installation. The setup wizard and Ace
Manager can be downloaded from
•
Datalogger—CR510, CR10(X), CR23X, CR7, CR1000,CR
3000, CR5000, or CR2XX
SC105 or SC932A Interface—connects the modem to any
dataloggers’ CS I/O port
•
L18863 Null Modem Cable—connects the modem to the
CR23X, CR2XX, CR1000, CR3000 or CR5000 RS-232 port
•
L6227 – Mounting plate for mounting on backplate of your
environmental enclosure. With this mount you will also
require a Velcro strap (L5207) to strap the Modem to the
plate.
Note: It is possible to mount the Raven X - Telus directly to the
backplate using the top two mounting holes of the modem and
two screws with grommets supplied with the mount. This,
however, is a tight fit.
3
