Campbell 110PV, Instruction Manual

Page: 9 / 38

1
110PV Surface Temperature Probe
1. Introduction
The 110PV-L temperature probe uses a thermistor to measure temperature
from –40 to 135 °C. It is designed for measuring the back of photovoltaic (PV)
module temperature but also can be used to measure other surface
temperatures. The 110PV-L is compatible with all Campbell Scientific
dataloggers.
This manual provides information only for CRBasic dataloggers.
It is also compatible with our retired Edlog dataloggers. For Edlog
datalogger support, see an older manual at
www.campbellsci.com/old-manuals or contact a Campbell
Scientific application engineer for assistance.
2. Cautionary Statements
•
READ AND UNDERSTAND the Precautions section at the front of this
manual.
• Do not use epoxy to secure the 110PV to a PV module.
•
Prying the 110PV off without heating it will likely damage both the probe
and PV module.
• The 110PV’s cable must be properly strain relieved after mounting the
probe to the measurement surface (Section 7.3 , Cable Strain Relief
(p. 10)
).
•
Placement of the 110PV’s cable inside a rugged conduit is advisable for
long cable runs, especially in locations subject to digging, mowing, traffic,
use of power tools, animals, or lightning strikes.
•
Santoprene ® rubber, which composes the black outer jacket of the 110PV
cable, will support combustion in air. It is used because of its resistance to
temperature extremes, moisture, and UV degradation. It is rated as slow
burning when tested according to U.L. 94 H.B. and passes FMVSS302.
However, local fire codes may preclude its use inside buildings.
3. Initial Inspection
•
Upon receipt of the 110PV, inspect the packaging and contents for
damage. File damage claims with the shipping company.
•
The model number, cable length, and cable resistance are printed on a
label at the connection end of the cable. Check this information against
the shipping documents to ensure the expected product and cable length
are received.
•
Refer to the Ships With list to ensure that all parts are included (see
Section 3.1 ,
Ships With
(p. 2)
.
NOTE