Campbell 10164-L, Instruction Manual

Page: 8 / 18

10164-L Sampler Control Cable for use with Isco and Sigma Autosamplers
3. Wiring
3.1 General Wiring Information
FIGURE 3-1 shows a schematic of the 10164 and TABLE 3-1 shows pin
connector and wire functions.
Sections 3.2 through 3.4 provide information about connecting the wires to a
datalogger. The datalogger wiring depends on the function.
FIGURE 3-1. 10164 Sampler Control Cable Schematic
TABLE 3-1. Technical Details of Cable Design
Wire Color Via Connector Pin
brown direct D
green direct F
purple direct B
yellow solid state relay circuit none (controls C)
red solid state relay circuit C
orange 20 kohm resistor E
clear cable shield no connection
2