background image

Do not run 
unattended. Leaving

compressor in AUTO position may allow it
to turn on inadvertently. To prevent this
and possible damage from power surge,
turn to OFF position after each use.

Since the air compressor and other
components (filters, lubricators, hoses,
etc.) used, make up a high pressure
pumping system, the following safety
precautions must be observed at all times:

1 . Read all manuals

included with this
product carefully. Be
thoroughly familiar
with the controls and
the proper use of the equipment.

General Safety
I n f o rm a t i o n

CALIFORNIA PROPOSITION 65

You can create dust 
when you cut, sand,

drill or grind materials such as wood,
paint, metal, concrete, cement, or other
masonry. This dust often contains
chemicals known to cause cancer, birth
defects, or other reproductive harm.
Wear protective gear.

This product or its 
power cord may

contain chemicals, including lead, known
to the State of California to cause cancer
and birth defects or other reproductive
harm. Wash hands after handling.

GENERAL SAFETY INFORMATION

Do not operate 
unit if damaged

during shipping, handling or use.
Damage may result in bursting and
cause injury or property damage.

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.

© 2008 Campbell Hausfeld/Scott Fetzer

D e s c r i p t i o n

This residential oil-lubricated compressor
is designed for do-it-yourselfers with a
variety of home and automotive jobs.
These compressors power spray guns,
impact wrenches and other tools.
Compressed air from this unit will
contain moisture. Install a water filter or
air dryer if application requires dry air.

Safety Guidelines

This manual contains information that is
very important to know and understand.
This information is provided for SAFETY
and to PREVENT E Q U I P M E N T P R O B L E M S .
To help recognize this information,
observe the following symbols. 

Danger indicates 
an imminently

hazardous situation which, if not avoided,
WILL result in death or serious injury.

Warning indicates 
a potentially

hazardous situation which, if not
avoided, COULD result in death or
serious injury.

Caution indicates a 

p o t e n t i a l l y

hazardous situation which, if not
avoided, MAY result in minor or
moderate injury.

Notice indicates 

i m p o r t a n t

information, that if not followed, M A Y
cause damage to equipment.

U n p a c k i n g

After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before
putting unit into service. In case of
questions, damaged or missing parts,
please call 1-800-543-6400 for customer
assistance or call the nearest Campbell
Hausfeld Authorized Service Center.
Have the serial number, model number,
and parts list (with missing parts circled)
before calling.

Operating Instructions  

IN615601AV 12/08

B reathable Air Wa rn i n g

This compressor/pump is not equipped
and should not be used “as is” to
supply breathing quality air. For any
application of air for human
consumption, the air
compressor/pump will need to be
fitted with suitable in-line safety and
alarm equipment. This additional
equipment is necessary to properly
filter and purify the air to meet
minimal specifications for Grade D
breathing  as described in Compressed
Gas Association Commodity
Specification G 7.1 - 1966, OSHA 29 CFR
1910. 134, and/or Canadian Standards
Associations (CSA).

DISCLAIMER OF WARRANTIES
In the event the compressor is used
for the purpose of breathing air
application and proper in-line
safety and alarm equipment is not
simultaneously used, existing
warranties shall be voided, and
Campbell Hausfeld disclaims any
liability whatsoever for any loss,
personal injury or damage.

Record the Model No., Serial No. and
date of purchase located on the base
below the pump in the space below.

Model No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Serial No. _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Date of purchase _________________

Retain these numbers for future
r e f e r e n c e

.

Oil-Lubricated Compre s s o r s

DO NOT RETURN THE
PRODUCT TO THE
R E T A I L E R !

For parts, product & service information

visit 

www.chpower.com

See Warranty on page 8 for important information about commercial use of this product.

REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.

Summary of Contents for IN615601AV

























Reviews: