REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
harm the unit and result in a
combustible condition or hazardous
external leakage. Misapplication will
void all warranties and manufacturer’s
responsibilities.
Installation
Disconnect power and
release all pressure from the
system before attempting to
install, service, relocate or
perform any maintenance.
1. Locate the air flow direction arrow
(See Figure 2, detail). This arrow
shows the direction of the air flow,
i.e., it points to the outlet.
!
WARNING
Mini General Purpose Filter
Operating Instructions & Parts Manual
Model MP513803, KBA106, HDA704
Description
The mini general pupose filter is
designed to remove most liquid and
solid particles from the air supply.
Specifications
Max. Temperature . . . . .125˚ F (52˚ C)
Max. Pressure . . . . . . . . .150 psi
Air Inlet/outlet . . . . . . . .1/4" NPT
Filter Element . . . . . . . . .5 micron
Unpacking
After unpacking the unit, inspect
carefully for any damage that may have
occurred during transit. Make sure to
tighten fittings, bolts, etc., before
putting unit into service.
Safety Guidelines
This manual contains information that
is very important to know and under-
stand. This information is provided for
SAFETY and to PREVENT EQUIPMENT
PROBLEMS. To help recognize this
information, observe the following
symbols.
Danger indicates
an imminently
hazardous situation which, if not
avoided, will result in death or serious
injury.
Warning indicates
potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
Caution indicates a
potentially
hazardous situation which, if not
avoided, may result in minor or
moderate injury.
!
CAUTION
!
WARNING
!
DANGER
Notice indicates
important
information, that if not followed, may
cause damage to equipment.
General Safety
Information
This product is a part of a high pressure
system and the following safety
precautions must be followed at all
times along with any other existing
safety rules.
Read this instruction manual
before installing this device
to the air supply system. Be
thoroughly familiar with
the controls and the proper use of the
equipment.
Safety
glasses
must be worn during
operation.
1. Always work in a well
ventilated area.
2. Do not exceed any pressure rating
of any component in the system.
3. Protect air lines from damage
and/or punctures.
4. Check air hoses for weak or worn
condition before each use. Make
sure all connections are secure.
5. Keep all nuts, bolts and screws tight
and ensure equipment is in safe
working condition.
This product is specifically
designed for compressed air
service ONLY. Use with any other
material (liquid or gas) is a
misapplication and not permitted. Use
or injection of certain hazardous liquids
or gases in the system (such as oxygen,
alcohol or liquid petroleum gas) will
!
DANGER
!
WARNING
NOTICE
MANUAL
IN707303AV 7/11
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Figure 1
Figure 2
For parts, product & service information
visit
www.chpower.com
Flow
Direction
Arrow
See Warranty on page 4 for important information about commercial use of this product.
© 2011
