19
DG411200CK
Notes
Notes
Notas
General Safety
Information
(Cont’d.)
Loose clothing may become caught
in moving parts and result in serious
personal injury.
4. Do not wear jewelry when
operating any tool. Jewelry may
become caught in moving parts and
result in serious personal injury.
5. Always use attachments designed
for use with this tool. Do not use
damaged or worn attachments.
6. Never trigger the tool when not
applied to a work object.
Attachments must be securely
attached. Loose attachments can
cause serious injury.
7. Never point a tool at oneself or any
other person. Serious injury could
occur.
8. Use steady, even pressure when
using tool. Do not force. Too much
pressure can cause blade to break
or overheat.
9. Keep all nuts, bolts and screws tight
and ensure equipment is in safe
working condition.
10. Do not put hands near or under
moving parts.
WORK AREA
Do not operate a
power tool in an explosive atmosphere,
such as in the presence of flammable
liquids, gases, or dust. Power tools
create sparks which may ignite the
fumes or dust.
Keep work area
clean and well lighted. Cluttered
benches and dark areas
invite accidents.
Keep
bystanders, children, and visitors away
while operating a power tool.
Distractions can cause you to lose
control.
ELECTRICAL SAFETY
Do not expose
power tools to rain or wet conditions.
Water entering a power tool will
increase the risk of electric shock.
Avoid body contact
with grounded surfaces such as pipes,
radiators, ranges, and refrigerators.
!
WARNING
!
WARNING
!
CAUTION
!
CAUTION
!
WARNING
There is an increased risk of electric
shock if your body is grounded.
Do not abuse cord.
•
Never carry tool by its cord.
•
Never pull the cord to disconnect
from receptacle. Pull plug at the
outlet.
1. Do not operate tool with damaged
cord or plug.
• Have a damaged or worn power
cord and/or strain relief replaced
immediately.
• Do not attempt to repair power
cord.
2. Make sure cord is located so that it
will not be stepped on, tripped
over, or otherwise subjected to
damage or stress.
3. Do not use an extension cord unless
absolutely necessary. Use of
improper extension cord could
result in a risk of fire and electric
shock. If an extension cord must be
used, make sure:
• That the pins on plug of extension
cord are the same number, size and
shape as those of plug on tool cord.
• That the extension cord is
properly wired and in good
electrical condition.
• If an extension cord is to be used
outdoors it must be marked with
the suffix “W-A” or “W” following
the cord type designation to
indicate it is acceptable for outdoor
use. For example – SJTW-A
4. Do not expose cord to rain, snow or
frost.
PERSONAL SAFETY
Do not misuse this
product. Excessive exposure to
vibration, work in awkward positions,
and repetitive work motions can cause
injury to hands and arms. Stop using
any tool if discomfort, numbness,
tingling, or pain occur, and consult a
physician.
1. Stay alert, watch what you are
doing, and use common sense when
operating a power tool. Do not use
tool while tired or under the
influence of drugs, alcohol, or
medication. A moment of
inattention while operating power
tools may result in serious personal
injury.
Avoid accidental
starting. Be sure switch is in the locked
or off position before plugging in the
!
CAUTION
!
WARNING
!
WARNING
tool. Carrying tools with your finger on
the switch or plugging in a tool with
the switch on invites accidents.
2. Remove adjusting keys or wrenches
before turning on the tool. A key or
wrench attached to a rotating part
of the tool may result in personal
injury.
3. Do not overreach. Keep
proper footing and
balance at all times.
Proper footing and
balance enable better control of the
tool in unexpected situations.
4. Always work in a well-ventilated
area. Wear an OSHA-approved dust
mask and safety glasses.
5. Hold tool by insulated gripping
surface when performing an
operation where the tool may
contact hidden wiring. Contacting a
“live” wire will make exposed metal
parts of the tool “live” and shock
the operator.
6. Keep hands away from rotating
parts.
7. Use clamps or another practical way
to secure the workpiece to a stable
platform. Never hold work in your
hand, lap, or against other parts of
your body when cutting.
TOOL USE AND CARE
Do not use tool if
switch does not turn it on or off. Any
tool that cannot be controlled with the
switch is dangerous and must be
repaired.
1. This tool must NOT be modified or
used for any application other than
that for which it was designed.
Do not force the
tool. Use the correct tool for your
application. The correct tool will do the
job better and safer at the rate for
which it is designed.
2. Maintain tools with care.
3. Check for misalignment or binding
of moving parts, breakage of parts,
and any other condition that may
affect the tool’s operation. If
damaged, have the tool serviced
before using. Many accidents are
caused by poorly maintained tools.
4. Use only accessories that are
recommended by the manufacturer
for your model. Accessories suitable
for one tool may create a risk of
injury when used on another tool.
!
CAUTION
!
WARNING
2
www.chpower.com
Operating Instructions and Parts Manual
