2
www.campbellhausfeld.com
Operating Instructions
General Safety
Information (Continued)
GeneRal saFety
This product is a part of a high pressure
system and the following safety
precautions must be followed at all times
along with any other existing safety rules.
1. Read ALL manuals included
with this product carefully.
Be thoroughly familiar with
the controls and the proper
use of the equipment.
2. ONLY persons well acquainted with
these rules of safe operation should
be allowed to use the air tool.
Do NOT exceed maximum
operating pressure of the air tool (90
pSI). The air tool COULD explode and
result in death or serious personal injury.
3. Do NOT exceed any pressure rating
of any component in the system.
Maximum operating pressure of 90
PSI is measured at the tool inlet while
the tool is running. The pressure drop
between the compressor and tool
needs to be compensated for at the
compressor.
Release ALL pressure from
the system before attempting
to install, service, relocate or
perform any maintenance.
4. Disconnect air tool from air supply
when not in use and before changing
tools, attachments or performing
service.
Safety glasses and ear
protection MUST be worn
during operation.
5. Do NOT wear loose fitting clothing,
scarves, neck ties or jewelry when
operating any tool. Loose clothing
or jewelry may become caught in
moving parts and result in serious
personal injury.
6. Do NOT depress trigger when
connecting air supply hose to tool.
7. Do NOT put hands near or under
moving parts.
Excessive exposure
to vibration, working
in awkward positions and repetitive work
motions can cause injury to hands and
arms. Stop using any tool if discomfort,
numbness, tingling or pain occur and
consult a physician.
8. Check air hoses for weak or worn
condition before each use. Make sure
ALL connections are secure.
9. Protect air lines from damage or
puncture. Do NOT carry tool by air
hose.
10. NEVER trigger the tool when not
applied to a work object. Attachments
MUST be securely attached. Loose
attachments can cause serious injury.
11. ALwAYS use attachments designed
for use with air powered tools.
Do NOT use damaged or worn
attachments.
12. Keep ALL nuts, bolts and screws
tight and ensure equipment is in safe
working condition.
13. ALwAYS secure workpiece in a vise
or clamp.
MANUAL
Please read and save these instructions. Read carefully before attempting to assemble, install,
operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with instructions could result in personal injury and/or property
damage! Retain instructions for future reference.
