CAMPARK X30, Manual, Page: 16 / 126

Choose the video lapse interval
time to activate time lapse
function. Eg: set it to 1 second
means the camera will capture
1 frame of video per second,
and if you set resolution to
1080P/30fps, then after 30
seconds you will get 1 second
video recorded. so you can
concentrate one day in a
several minutes video.
0.5S / 1S / 2S / 5S /
10S / 30S /60S
Rec
Interval
Lapse
Photo
Photo
Resolution
Adjust photo resolution, with
higher resolution, the photo
will be clearer.
20MP / 16MP /
13MP / 8MP
Distortion
Correction
Turn ON to correct wide angle
distortion
ON / OFF
White
Balance
Choose the right white balance
according to using conditions,
normally we recommend keep
it in Auto.
Auto/Sunny/
Cloudy/
Incandescent/
Fluorescent
Exposure - 3 / -2 / -1 / -1 / 2 / 3
Adjust exposure according to
using conditions to adjust
picture brightness.
Metering
Mode
Average / Center /
Spot / Matrix
Adjust camera light metering
mode.
Sharpness High / Middle / Low Adjust photo sharpness
Long
Exposure
Auto / 2S / 5S / 10S /
15S / 20S / 30S
Under low-light conditions, you
can choose to extend exposure
time to get a brighter photo.
EN
10