FT-291 Pina Fountain
Revised July 21, 2017
Assemble your fountain on a level surface capable of holding a minimum of 153 pounds with
an approximate 1 square foot footprint.
FT-291B (120 lbs)
25”W x 21” H
FT-291A (8 lbs)
7”W x 8.25” H
1.
Position the basin (FT-291B) where the fountain
is to be installed, ensuring that it is level.
2.
Assemble the pump kit
a.
Using a hose clamp, attach the 1/2" non-
kink tubing to the pump outlet.
b.
Place the stopper around the pump cord
approximately 6 inches from the pump.
3.
Feed the pump cord through the hole in the
basin (FT-291B) and out of the channel.
4.
FIRMLY press the stopper into the hole evenly.
a.
Note: Using the handle of a screwdriver
or hammer works best to press the stopper
in place.
5.
Coil the pump cord in the pump house.
6.
Fit the 5/8” clear tubing to the water feature
(FT-291A).
7.
Place the water feature (FT-291A) into the basin
(FT-291B) ensuring that it is level.
a.
Turn the feature to coil the tubing as you
lower it into position.
8.
Fill the fountain with water.
