rev 4/23/2020
FT-269 Monteros Fountain
Assembly Instructions
Step 9 - Position the medium bowl (FT-269E) over the large pedestal (FT-269F).
Step 10 - Using a hose clamp, secure the tubing that was fed through the large pedestal (FT-269F)
to the pipe protruding from the bottom of the medium bowl (FT-269E).
Step 11 - Secure the 18" length of tubing to the pipe protruding from inside the medium bowl
(FT-269E) with a hose clamp.
Step 12 - Insert the remaining #7 Drain Stopper into the drain hole in the medium bowl (FT-269E).
FT-269E (94 lbs)
29"W x 9.5"H
Step 13 - Place the small pedestal (FT-269C) in the center of the medium bowl (FT-269E).
Step 14 - Feed the 18" length of tubing connected to the inside of the medium bowl (FT-269E)
through the hole in the center of the small pedestal (FT-269C).
FT-269C (35 lbs)
9.25"W x 14"H
Step 15 - Position the small bowl (FT-269B) over the small pedestal (FT-269C).
Step 16 - Using a hose clamp, secure the tubing that was fed through the small pedestal (FT-269C)
to the pipe protruding from the bottom of the small bowl (FT-269B).
FT-269B (40 lbs)
20.25"W x 7"H
Step 17 - Place the finial (FT-269A) into the small bowl (FT-269B) by fitting the copper in the finial
over the copper in the bowl.
FT-269A (22 lbs)
5.5"W x 12.5"H
Step 18 - Fit the small pump cover door (FT-269D) into the small pedestal (FT-269C).
FT-269D (3 lbs)
5"L x 1.5"W x5"H
