FT-199 Lucas Fountain
Assembly Instructions
Step 11 - Fit the plumbing cover (FT-199E) into the space in front of the 6" length of non-kink
tubing.
FT-199E (2 lbs)
6.25"L x 1"W x 3"H
Step 12 - Insert the copper “T” into the pipe protruding at the top of the water feature (FT-199B).
12a - This is meant to control water flow.
Step 13 - Spread a thin bead of silicone at the top of the water feature (FT-199B) and lower the
spiller stop (FT-199A) into place.
13a - Clean away any excess silicone.
FT-199A (11 lbs)
10"L x 5"W x 3.5"H
Step 14 - Place the pump cover plate (FT-199D) over the pump inside the basin (FT-199C).
Step 15 - Let the silicone set for 24 hours before filling the fountian with water.
FT-199D (7 lbs)
6"L x 12.5"W x 1"H
