LED-KIT1 - Single LED Light Kit
Assembly Instructions
rev 7/22/2022
Light Kit Parts List
Image
Component
Quantity
LED-LIGHT
1
LED-Cord
1
LED-TRANS
1
Assembly Instructions
Step 1 -
Connect the light (LED-LIGHT) to the 3-meter extension cord (LED-Cord) and seal the
connection with cover already installed onto the longer light cord.
1a -
Every light has a long cord and a short cord attached. Please ensure the smaller cord
end has the water-tight screw cap installed.
Step 2 -
Install the light and cord into the fountain. Ensure that the extension cord extends out of
the fountain.
Step 3 -
Attach the loose end of the extension cord to the transformer (LED-TRANS) and seal the
connection with cover already installed onto extension cord.
