FT-49 Rustica Pot Fountain
Two people are recommended for the installation of this fountain!
Revised February 25, 2017
Assemble your fountain on a level surface capable of holding a minimum of 183 pounds with
an approximate 3/4 square foot footprint.
FT-49B (115 lbs)
20.5”W x 17.5”H
FT-49A (34 lbs)
15.25W” x 2.25”H
1.
Position the basin (FT-49B) where the fountain
is to be installed, ensuring that it is level.
2.
Assemble the pump kit.
a.
NOTE: All pumps come with 1 adapter
already inserted into the pump and 2
adapters secured to the power cord.
i.
This fountain uses the largest
adapter provided.
b.
Using a hose clamp, attach the 1/2” non-
kink tubing to the pump outlet.
c.
Place the stopper around the pump cord
about 6” from the pump.
3.
Feed the pump cord all the way through the hole
and the channel in the basin (FT-49B) to ensure
the fountain will be level.
4.
FIRMLY
press the stopper into the hole evenly.
a.
Note:
Using the handle of a screwdriver
or hammer works best.
5.
Holding the water feature disc (FT-49A) over
the basin (FT-49B), insert the CPVC end of the
tubing assembly into the coupling protruding
from the bottom of the disc.
6.
Center the water feature (FT-49A) into the basin
(FT-49B).
7.
Fill the fountain with water.