FT-320 Large M Weave Fountain
Two people are recommended for the installation of this fountain!
Revised July 18, 2018
Assemble your fountain on a level surface capable of holding a minimum of 1200 pounds with an approximate 6 square foot footprint.
FT-320E (468 lbs)
38”L x 25”W x 16”H
FT-320C (64 lbs)
33.5”L x 6.25”W x 8.25”H
FT-320A (561 lbs)
33”L x 7.75”W x 33.5”H
FT-320B (4 lbs)
29.25”L x 2.25”W x .75”H
FT-320D (3 lb)
5.5”L x 0.75”W x 6.75”H
1.
Place the basin (FT-320E) into position where the fountain will be
installed, ensuring that it is level.
2.
Assemble the pump kit
a.
NOTE: All pumps come with 2 adapters.
i.
This fountain uses the larger adapter provided.
b.
Using a hose clamp, attach the tubing assembly to the pump
outlet.
3.
Place the pump in the center of the pump cover (FT-320C).
4.
Lay the pump cord over the edge at the back of the basin.
5.
Place the water feature (FT-320A) on top of the pump cover and
ensure that the pump cord exits through the hole provided.
6.
Insert the CPVC pipe attached to the preassembled tubing into the
coupling protruding from the bottom of the water feature (FT-
320A).
7.
Place the spiller stopper (FT-320B) inside the top of the water
feature.
8.
Place the pump cover door (FT-320D) in the pump access opening
of the pump cover.
9.
Fill the fountain with water.
