FT-318 Kito Fountain
Revised July 17, 2018
Assemble your fountain on a level surface capable of holding a minimum of 100
pounds with an approximate 1 square foot footprint.
FT-318C (14 lbs)
13.25”L x 13.25”W x 3”H
FT-318B (53 lbs)
16.25”L x 16.25”W x 7.25”H
FT-318A (15 lbs)
13”L x 13”W x 1.25”H
1.
Position the base (FT-318C) where the fountain is to
be installed, ensuring that it is level.
2.
Center the basin (FT-318B) on the base, ensuring that
it is centered and level.
3.
Assemble the pump kit
a.
Connect the tubing to the pump outlet.
i.
NOTE: All pumps come with 2 adapters.
1.
This fountain uses the medium
adapter provided.
b.
Place the stopper around the pump cord
approximately 6” from the pump.
4.
Feed the pump cord through the hole and channel in
the basin (FT-318C).
5.
FIRMLY press the stopper into the hole evenly.
a.
Note: Using the handle of a screwdriver or
hammer works best to press the stopper in place.
6.
Holding the water feature (FT-318A) over the basin,
insert the CPVC end of the tubing assembly into the
coupling protruding from the bottom.
7.
Carefully place water feature into the basin (FT-318B)
ensuring that it is centered and level.
8.
Fill the fountain with water.
