FT-314 Quartet Fountain
Two people are recommended for the installation of this fountain!
Assemble your fountain on a level surface capable of holding a minimum of 450 pounds with an approximate 3 square foot footprint.
FT-314F (172 lbs)
22”L x 20”W x 13”H
FT-314E (24 lbs)
17.25”L x 8”W x 15”H
FT-314C (130 lbs)
17.25”L x 8”W x 15”H
FT-314B (5 lbs)
14”L x 4"W x 1”H
FT-314A (59 lbs)
18.5”L x 9.5”W x 9.5”H
FT-286D (4 lbs)
7”L x 1.25”W x 4.75”H
1.
Position the basin (FT-314F) where the fountain is to be installed.
2.
Insert the drain stopper into the hole at the corner inside the basin
3.
Check that the basin (FT-314F) is level before moving to the next
step.
4.
Place the pump cover (FT-314E) along the back edge of the basin.
5.
Assemble the pump and tubing.
a.
Using a hose clamp, attach the 1/2" non-kink tubing to the
small pump outlet.
b.
NOTE: Use the smaller pump adapter provided in the
pump box. This piece is inserted into the pump.
6.
Place the pump in the center of the pump cover.
7.
Lay the pump cord over the edge at the back of the basin.
8.
Place the water feature (FT-314C) on top of the pump cover and
ensure that the pump cord exits through the hole provided.
9.
Insert the 2” CPVC pipe into the coupling protruding from the
bottom of the water feature (FT-314C).
10.
Using the silicone provided, secure the copper spiller to the top lip
of the water feature.
11.
Place the spiller stop (FT-314B) inside the top of the water
feature.
12.
Place the Quartet Doves statue (FT-314A) on top of the water
feature (FT-314C).
13.
Place the pump cover door (FT-286D) in the pump access opening
of the pump cover.
14.
Let the fountain sit 24 hours before filling with water to let the
silicone dry completely.
Revised May 23, 2018
