FT-259 Garden Terrace
Meditation Fountain
Assembly Instructions
rev 3/30/2020
Fountain Information:
• This fountain holds approximately 1/2 gallon of water.
• A fountain cover is not available for this fountain.
• No refill device or submersible lights are suggested for this fountain.
Pump Information:
WP450LV - 120 GPH Low Voltage Pump (16 ft. cord length)
Tools Required:
Bubble Level
Screwdriver
Scissors
Pump Kit Parts List
Image
Component
Quantity
PK120-LV Pump with Transformer
1
#10 Series Stopper
1
2-1/2" length of PermaGum Putty
1
Approx. 6" length of 1/2" black
non-kink tubing
1
Approx. 1" length of 5/8" clear tubing
1
1" length of 1/2" CPVC pipe
1
Adhesive Dots
4
Hose Clamp
1
Fountain Components
Image
Item Description
Component
Item #
Quantity
Garden Terrace
Meditation
Fountain Frog
FT-259A
1
Garden Terrace
Meditation
Fountain Disc
FT-259B
1
Garden Terrace
Meditation
Fountain Basin
FT-259C
1
Proudly
MADE IN USA
Fountain Set-Up:
Assembly & Installation - A fountain can be difficult to install without knowing and understanding the steps involved. To ensure your fountain is
installed properly, please read our instructions and tips before you begin.
Step 1 - Seek Professional Help: Check if professional installation is recommended for your fountain.
Step 2 - Check Foundation: Place your fountain on a level surface. It is recommended to place your fountain on concrete or a hard packed
gravel pad. If the base is level but some components seem off, rotate components or use wedges to level them.
Step 3 - Create a Drip Loop: To prevent water from dripping down the cord and damaging the electrical socket, create a drip loop by allowing
the pump power cord to fall below the wall outlet.
Step 4 - Use a GFCI Outlet: Use only a GFCI outlet when running a fountain.
