Campania International FT-178 Assembly Instructions Download Page 3

Page: 3 / 4

FT-178 Rustic Spa Fountain with Planter

Assembly Instructions

Step 8 - Fill the basin enough to cover the pump completely with water to check for leaking.

8a - If leaking occurs…

- Remove the stopper and repeat step 6 again.

- Use some of the excess putty to seal the cord around the top of the stopper.

See image “D”

- Let the fountain dry completely, then use 100% clear silicone to seal around the

pump cord and perimeter of the stopper. Silicone must set for 24 hours before
adding water.

Step 9 - Repeat step 6 for the planter (P-580) with the second stopper provided.

9a - Note: There is no need to fi ll the planter with water to check for leaks

FT-175A (22 lbs)

7.5"W x 9.5"H

Step 10 - Holding the water feature (FT-175A) over the basin (FT-175B), slip the loose end of the

tubing assembly to the pipe protruding from the bottom.

Step 11 - Center the water feature (FT-175A) into basin (FT-175B).

Step 12 - Attached the pump cord to the transformer.

Summary of Contents for FT-178

Page 1: ...ft cord length Tools Required Bubble Level Screwdriver Scissors Pump Kit Parts List Image Component Quantity PK120 LV Pump with Transformer 1 7 Stopper 2 2 length of PermaGum Putty 2 Approx 8 length o...

Page 2: ...n FT 175B and P 580 Step 5 Feed the pump cord all the way through the hole and the channel in the basin FT 175B and the planter P 580 to ensure the fountain will be level Step 6 Firmly press the stopp...

Page 3: ...silicone to seal around the pump cord and perimeter of the stopper Silicone must set for 24 hours before adding water Step 9 Repeat step 6 for the planter P 580 with the second stopper provided 9a Not...

Page 4: ...s completely seated in the fountain You can also use 100 pure clear silicone to ensure a proper seal is achieved Step 4 Cracking Your fountain may be cracked from improper winter care see Winter Care...