CAMPAGNOLO COMPONENTS - TECHNICAL MANUAL
6
SPROCKETS - Rev. 00/ 06-2021
C
B
D
UT-BB080
40 N.m - 29.5 lb.ft
Z9 - 45 Nm
Z10 - 40 Nm
CLOSE
D
G
B
UT-BB080
Fig.4
• Using a torque wrench (D - Fig. 4) together with
Campagnolo
®
tool UT-BB080 (B - Fig. 4), tighten
the locknut (G - Fig. 4) on the FW body to 45 Nm
(398 in.lbs) for sprocket cassettes starting from Z9
(unless otherwise indicated on the locknut) or 40
Nm (354 in.lbs) for sprocket cassettes starting from
Z10 (unless otherwise indicated on the locknut).
The ring and the smallest sprocket
(Z10) have a specific knurl which is
compatible solely and exclusively with
13s versions. Other combinations may
cause accidents, physical injury and
death.
WARNING!
C
B
F
B
G
E
X
UT-CS060
Fig.5
OPEN
• Remove the locknut (G - Fig. 5) using
Campagnolo
®
tool UT-BB080 (B - Fig. 5) with a 24
mm Allen wrench (E - Fig. 5) and wrench with chain
Campagnolo
®
UT-CS060 (X - Fig. 5), or equivalent
tool.
• Remove the sprockets from the FW body.
Use Campagnolo
®
13 Speed sprockets only.
!
5 - 13s SPROCKET REMOVAL
