Use and maintenance manual – Translation of
original Instruction. : 04 date 16/09/2021
Page 33
6.5 Periodic maintenance table
MAINTENANCE
Routine maintenance
Special maintenance
N
ew
b
lad
e (
w
ithi
n
the f
irs
t 15
mi
nut
es
)
Ev
er
y hour
Ev
er
y day
Af
ter
100 hour
s
(about
20
0,
00
0 c
ut
s)
Ev
er
y 90 d
ay
s
At
th
e e
nd o
f eac
h
w
or
k s
eas
on or
at
leas
t onc
e p
er
y
ear
Mobile blade sharpening .
X
X X
Mobile blade replacement.
X
Blades lubrication by means of LUBE SPRAY GREASE lubri-
cant, recommended by the Manufacturer.
X
Rack cleaning and lubrication.
X
Maintenance charge of the battery, preventing it from dropping
below 10V (no longer rechargeable).
X
General overhaul at an Authorized Service Point.
X
7.1 Disposal of exhaust materials
After having been installed and during use, the machine does not cause any environmental pollution. However,
throughout its working life, some types of residual waste or exhaust materials, such as the lubricants for the
mechanical components, are being produced in certain maintenance situations.
There are specific regulations in every Country as for the disposal of these materials and the environment protec-
tion. The Customer is required to be knowledgeable in the Laws in force in his own Country and to operate only
while complying with these regulations, according to the indications in the product technical charts, which may
be obtained from the Manufacturer.
The Laws in force about the disposal of mineral oils or greases used for the lubrication / maintenance operations
must be followed.
More information about the disposal of oils and other substances can be found in the safety chart of the sub-
stances.
The steps employed in the disposal of toxic waste including the collecting, transporting, processing (transfor-
mation for recycling), as well as the deposit and the dumping onto the ground are all usual activities of common
interest and are subject to the following general principles:
a) Any risks of injuries or dangers for the health and safety of any individual and of the community have
to be avoided.
b) Compliance with any and all hygienic-sanitary requirement and avoidance of any air, water, ground
and underground pollution have to be guaranteed.
Compliance with efficient and economical principles in order to save and recycle energy and materials shall be
promoted.
7.2 Indications for special waste
Special waste is that deriving from industrial processes as well as from materials of dismantled equipment and
deteriorated and obsolete machineries.
The special (also toxic and harmful) waste producers shall provide for its disposal directly or through qualified,
authorised companies or bodies, or shall deliver them to public service after having made an agreement.
When disposing of special waste, check with the relevant local government authority for any available information
regarding such waste disposal in your region.
Any unauthorised disposal by the owner of a product is followed by the application of the sanctions due to the
regulations in force.