Camp Power SIM-700 User Manual Download Page 5

2

1.4 Safety Precautions

1. Please read the “Safety Precautions” before use to ensure safe and 

proper operation of the SIM-700. Keep this manual in a safe and 
secure place. Warranty will be null and void if the user fails to follow 
all warnings and cautions in this manual.

2. Please follow all warnings when operating this unit.

3. Keep the inverter away from direct sun, rain, and humid conditions.

4. Keep the inverter away from heat sources like, fire, electric heaters, 

ovens, furnaces, etc.

5. Keep a safe distance, approximately 4-6 inches, for ventilation and 

follow the manual when installing.

6. When cleaning, always turn the power off. Use a clean dry cloth and 

do not use liquids to clean this product.

7. In the event of electrical fire, use only dry powder fire extinguisher. 

There is a danger of electric shock if a liquid fire extinguisher is used.

8. 

DO NOT

 open the case or touch any internal parts or wiring. Only 

connect cables to the provided external ports. Warranty is voided if 
case is opened.

9. Please contact Camp Power for any maintenance needs. 

(See page i 

for contact information)

2. OPERATING INSTRUCTIONS

2.1 Product Installation & Connection Steps

1. Please open the packaging carton to verify that product is 

undamaged due to shipping.

2. 

ATTENTION: 

Always connect the battery properly to avoid serious 

damage to the unit.

Summary of Contents for SIM-700

















Reviews: