If there are no pellets check to see if the auger is turning. If
the auger motor is turning but the auger is not there may be
a sheared auger pin. You can determine if the auger motor is
turning by watching the small white fan at the end of the auger
motor under the hopper. If the white fan is turning the auger
motor is on. If the white fan is turning and the auger is not you
will need to replace the auger pin.
If problem cannot be resolved please call customer service.
DIGITAL READOUT DISPLAYS SENSR
1. Turn the power off and unplug the grill.
2. Check to make sure the sensor inside of the grill is connected
properly to the electronic board under the hopper.
3. Call customer service for a replacement sensor.
DIGITAL READOUT DISPLAYS PRERR
1. Press the Probe Temp button - Pressing the Probe Temp button
will toggle the digital readout between the actual temperature
inside of the grill and the temperature measured using the
meat thermometer.
2. Make sure the meat thermometer is connected properly to
the front of the grill. If the Probe Temp button is pressed to
display the Probe Temp without the meat thermometer properly
connected to the front of the grill it will display PRERR.
3. Call customer service for a replacement meat thermometer.
DIGITAL READOUT DISPLAYS “-----”
1. Rotate the dial from Shutdown to feed or any other cook setting.
Page 9
LIMITED WARRANTY
To activate warranty, register on-line at: www.CampChef.com
The manufacturer warrants stove components (except
paint and finish) to be free from defect in materials and
workmanship for 1 year from the date of purchase. All
accessories (included with stove or purchased separately)
are warranted from defect in materials and workmanship
for 90 days from the original purchasing date. Within these
periods, the manufacturer will replace or repair defective
parts deemed unusable from its original intent by making
available the parts thereof
FOB Hyde Park, UT 84318
Product paint and finish is not warranted. The exterior finish
of the product will wear down over time.
Clean the unit after each use to maintain the finish and
prolong the life of your product. Wipe away all grease and
ashes. Keep metal products free of moisture, salts, acids
and harsh fluctuations in temperatures.
Warranty does not cover normal wear of parts or damage
caused by misuse, abuse, overheating and alteration.
Repairs or alterations made by anyone other than Camp
Chef are not covered in this Warranty. Manufacturer will
not be held liable for any losses due to neglectful operation.
Furthermore, this Warranty does not cover damaged caused
by natural disasters such as earthquakes, hurricanes,
tornadoes, floods, lightning, fires, etc.
Upon the expiration of this warranty all such liability will
terminate. No other warranties are expressed or implied.
Keep all original sales receipts. Proof of purchase is
required to obtain Warranty services. Prior written approval
and a Return Authorization Number must be obtained and
accepted for repair or replacement only. Returns must be
shipped prepaid. Collect shipment or shipments without a
Return Authorization Number will not be accepted.
To obtain Warranty services call 1.800.650.2433.
*Warranty applies to the contiguous US states only.
