background image

The manufacturer warrants stove components (except paint and finish) to be free from defect in materials and workmanship for 1 

year from the date of purchase. All accessories (included with stove or purchased separately) are warranted from defect in materials 

and workmanship for 90 days from the original purchasing date. Within these periods, the manufacturer will replace or repair 

defective parts deemed unusable from its original intent by making available the parts thereof FOB Hyde Park, UT 84318

Product paint and finish is not warranted. The exterior finish of the product will wear down over time. 

Clean the unit after each use to maintain the finish and prolong the life of your product. Wipe away all grease and ashes. Keep 

metal products free of moisture, salts, acids and harsh fluctuations in temperatures.

Warranty does not cover normal wear of parts or damage caused by misuse, abuse, overheating and alteration. Repairs or 

alterations made by anyone other than Camp Chef are not covered in this Warranty. Manufacturer will not be held liable for 

any losses due to neglectful operation. Furthermore, this Warranty does not cover damaged caused by natural disasters such as 

earthquakes, hurricanes, tornadoes, floods, lightning, fires, etc. 

Upon the expiration of this warranty all such  liability will terminate. No other warranties are expressed or implied.

Keep all original sales receipts. Proof of purchase is required to obtain Warranty services. Prior written approval and a Return 

Authorization Number must be obtained and accepted for repair or replacement only. Returns must be shipped prepaid. Collect 

shipment or shipments without a Return Authorization Number will not be accepted.

*Warranty applies to the contiguous  US states only.

  LIMITED WARRANTY

1211-FP40-PARTS

Summary of Contents for FP40














Reviews: