EN
UVIX suite User Manual
18
It is possible to open the command sending section in a dedicated
window in order to allow the user to see other information at the same
Clicking on
Last commands
will display a table with the list of commands
sent to the device.
This table shows:
•
User
: username of the user that sent the command.
•
Command
: description of the command sent.
•
Slave
: in the event that the command is sent to a particular slave, its ID
is shown followed by a description of the type.
•
Result
: outcome of the command.
•
Sent at
: date and time of sending the command.
•
Recevied at
: date and time of receiving the command.
• Clicking on the button in the last column
[1]
opens a pop-up, which
shows a greater level of detail regarding the command sent.
time, such as alarms or variables. In order to open a dedicated window,
double click on the
New command button
.
