Camos CWM-500, Instruction Manual

Page: 8 / 16

8
Screen switch while trigger input 5
What is <Trigger input> or <Trigger signal>? We call it when a circuit works by a signal for
example if driver uses right/left turn signal or reverse gear, the monitor shows connected
camera screen on driving mode.
1) If there is trigger signal input, the connected screen (Trigger input screen) is displayed and
the screen goes former one when the signal is disappeared.
* Below example is set with TRG1(Left signal light)=CAM1 / TRG2(Right signal light)=CAM2 /
TRG3(Rear light)=CAM3.
CAM3 CAM1
2) In case of light on emergency blinker(TRG1+TRG2), the monitor displays CAM3. And the
screen goes former one when the signal(light on emergency blinker) is disappeared.
The example is set with TRG1(Left signal light=CAM1 / TRG2(Right signal
light)=CAM2 / TRG3(Rear light)=CAM3.
NOTICE
CAM1 CAM3
Current screen
ex. CAM3(Rear view)
Connected screen
by the trigger line
Current screen
ex. CAM1(Left view)
Rear view camera screen(CAM3)
with the emergency light