13
CN-800
Bluetooth phone control
Bluetooth phone control
The phone menu allows
you to use your device as
a handsfree device for a
mobile phone supporting
Bluetooth connection. You
can tap your device to place
and receive phone calls
instead of picking up the
mobile phone.
Pairing with a mobile phone
Tap the phone button on the main screen and the pair mode button. Blue-
tooth radio turns on.
If this is the first time you use the program, your device will switch to pair
mode and wait for the pairing action from your mobile phone (max. for 4
minutes). The connection will be established as long as you initiate the pair-
ing process.
If you are prompted to enter the pin code (or pass key) on your mobile
phone, tap the pass key specified by the CN-800 (the default is ‘0000’) and
tap OK.
You will see the phone main screen after the pairing is completed. The sta-
tus bar at the bottom shows the name of the mobile phone connected.
The next time you run the phone program, your device will automatically
search and pair with one of the last connected mobile phones.
NOTE:
Your device must be in pair mode for the mobile phone to find your de-
vice. If you need to manually set your device to pair mode, tap pair mode
on the phone main screen.
Some mobile phones can automatically connect the hands-free service.
Up to 5 sets of paired mobile phones can be stored. A 6th paired mobile
phone will replace the oldest one.
The Phone program cannot access the data such as the phone book and
call history stored in a connected mobile phone.
1.
2.
3.
4.
•
•
•
•
Summary of Contents for CN-800
Page 36: ......