Camos BHS-500, Instruction Manual

Page: 18 / 29

17
2.) Connect the headset with audio device (Channel 1)
1a) BHS-500: Press the „-“ key to activate the headset. After this, press the „+“ key until the
red LED is blinking fast. Activate the Bluetooth function of your audio device
simultaneously.
1b) BHS-600: After the headset has been switsched on, enable the headset on channel 1
(CH 1) and press the „-“ key for 3 sec. Activate the Bluetooth function of your mobile phone
simultaneously.
2) Switch the pairing key of your headset from position CH1 for a short time to position CH2
and back to CH1.
3) Please make use of the instruction manual of your audio device to see how to connect it to
the headset.
3.) Activate the intercom function (Channel 2 / only BHS-600)
1) To activate the intercom function on channel 2, make sure that the relevant key has been
moved to the position „master“ at one of the headsets and on the other headset to the
position „slave“.
2) After you switched on both headsets, activate channel 2 (CH 2) by pressing the „+“ key on
both headsets for 3 Sec.
3) Switch the pairing key of your headsets from position CH2 for a short time to position CH1
and back to CH2. After a short fast blinking of the red LED, the headsets are connected.
If you want to disconnect your audio device, switch off the bluetooth function of the device. The
next time you switch on both units simultaneously, they will be connected automatically.