turn on video & images
4
Preparation
Compensation for recorded content
CamOne Tec will not be responsible in any case for any consequential or direct problems that
will lead to a loss of recorded or edited data. Furthermore, CamOne Tec will not guarantee the
content in case the recording or saving is not working properly. The above limitations are also
valid in case the unit has been repaired. Do not remove the micro SD Card while recording
or saving. Do not switch off or take out the battery before the recording has been finished or
as long as there is access to the memory, indicated by a rotating circle. Protect the unit from
extreme temperatures. Do not record at temperatures lower than minus 10°C or higher than
50°C. Remove the camera from the windshield/sucking pad in case extreme temperatures
can be expected!
It is known that forged accumulators which remarkably look like the original product are
offered for sale repeatedly. Some of these accumulators are not equipped with a proper
protection circuit which would satisfy the regulations of the prevailing safety regulations.
These accumulators might lead to fires or explosions. We take no liability for accidents,
damages or failures which result from the use of a forged accumulator.
Insert/replace Battery
1. Push the locker to the front (lens direction)
2. Pull out the battery cover.
3.
Remove the cover, below you will find the battery case.
4. Align the battery’s contacts with the golden contacts inside the
cam and insert battery.
!
Only use the original battery (Art-No.: COIN08). Batteries
of other suppliers may have different polarities and cause
damages!
Charging the Battery
The enclosed battery is not fully charged when being purchased. Please charge the battery
before using the CamOne infinity for the first time!
Connect the camera with your computer using the included USB-cable. The charging process
is indicated by the red LED light which switches to green as soon as charging is finished.
Charging takes about 3 hours. You can alternatively use the 5V USB-Power adaptor (Art.
No.: FCHD43).
1
2