16
Activation
All components were observed and mounted by you in accordance with the previous points.
!DO ONLY ACTIVATE WITH INSERTED CAMERA!
External influences while use may damage the Gimbal!
Do not move the Gimbal (head and camera mount) by hand!
Make sure that the motors can move freely on their axis and that the
cables are not stuck.
Hold the Gimbal-Grip upright and motionless and then press the Power Switch.
The LEDs of the motors will flash in blue.
The Gimbal will adjust itself automatically after a few seconds. Now move the Gimbal carefully and
test the functions.
If the Gimbal is not hold smoothly, the LEDs of the motors will shine red.
Make sure that the functionality of the Gimbal is not influenced by dirt or moisture!
LED Description