Camon SC45E, Operating Instructions Manual, Page: 26 / 36

SC45E Circular Saw
Page 26
SC45E/05.14
+RZWRFKDQJHWKHVDZEODGH
Should the blade be replaced, proceed as follows:
Disconnect the plug from the power supply and wear protective gloves.
8QVFUHZWKHQXWWKDWKROGVWKHSLYRWLQJFDUULDJHLQSODFH¿JSDJHUHPRYHWKHZDVKHUDQG
RSHQWKHPDFKLQHSODFLQJWKHFDUULDJHRQWKHÀRRU¿JSDJH
:$51,1*,7,6675,&7/<)25%,''(1725(029(7+(187$LQ¿J
SDJH)520,766(&85,7<&+$,1
During this operation it is very important to verify the conditions of the pads and the anti-sawdust
protection.
8VLQJWKHVSHFLDONH\VXSSOLHGKROGWKHÀDQJHDQGXQVFUHZWKHQXWZLWKDVXLWDEOHNH\.H\
¿JSDJH
5HPRYHWKHQXWDQGWKHÀDQJH
To unscrew the nut, move the key in the direction of arrow no. 1.
Remove the worn blade and replace it with a new one of a suitable type (page x “Suitable blades in
compliance with EN 847-1 standards”).
:$51,1*&+(&.7+$77+(:25.$5($,6)5(()5202%-(&76$1'253(56216
7+$70$<+,1'(57+(23(5$7,215,6.2)6(5,286,1-85<
To assemble the blade, follow the instructions given on page 20.
If you leave the machine unattended, switch it off by turning the switch to “O” (off) or by pushing
the red button.
Routine Maintenance
!