background image

 

Page 

3

 of 

6

 

 

 

Engine Safety Instructions 

 

Always ensure the engine is turned off and fuel tap is turned off when transporting the 
machine, cleaning the machine, and making adjustments. 

 

Always start the engine in the open air. Starting an engine within a confined space can lead 
to the inhalation of toxic substances. 

 

Do not smoke or use a naked flame when refuelling. 

 

Only use unleaded petrol from fuel containers designed for this purpose. Refuel outdoors 
only and replace the fuel tank cap securely. 

 

Do not mix oil with the fuel. 

 

Leave one inch of space in the fuel tank during refilling. 
 
WARNING 

 Petrol is highly flammable. 

 

 

Store fuel in containers specifically designed for the purpose. 

 

Refuel outdoors only and do not smoke while refuelling. 

 

Add fuel before starting the engine. Never remove the cap of the fuel tank or add petrol 
while the engine is running or when the engine is hot. 

 

If petrol is spilled, do not attempt to start the engine but move the machine away from the 
area of spillage and avoid creating any source of ignition until petrol vapours have 
dissipated. 

 

Replace all fuel tanks and container caps securely. 

 

Avoid contact with the engine during operation as it will become hot. Leave the engine to 
cool prior to contact. 

 

Never interfere with the control settings of the engine. 

NEVER TILT THE MACHINE BACKWARDS WHEN CLEANING. 

Starting the Engine 

1.

 

Pull the engine recoil handle slowly until it engages then pull hard and fast to start the 
engine. 

2.

 

After the start, guide the cord back into its position. Do not let it snap back. 

3.

 

Once the engine has started, if the choke lever has been used, return this to its OFF position 
after the engine has run for a few seconds. 

Stopping the Engine 

1.

 

Release the operating lever. 

2.

 

Switch the engine ON/OFF switch to the ‘O’ off position.

 

3.

 

Turn the fuel tap lever to the OFF position. 

4.

 

Ensure the blades have stopped rotating prior to moving the machine. 

PPE 

We recommend the following PPE when using the lawn scarifier 

 

Ear Defenders 

 

Gloves 

 

Protective Footwear 

 

Safety Glasses 

Summary of Contents for LS42







Reviews: