CAMMHD DSJ-C11, Operation Manual, Page: 22 / 24

Machine failure and solution
The fault
phenomenon
Fault diagnosis Troubleshooting
The host can't boot
up
Battery exhausted Enough to charge for 4 hours
Host protection After clicking the (Reset) button, restart
Host protection
Connect the computer with a data cable, hot-swap the interface several
times, activate the device to restart
The host short work
time
Insufficient charge Full charge for more than 4 hours
connection
interruption
5
The insufficient USB power
upply in front of a compute It is recommended to connect the USB port on the back panel of the
computer
The computer can
not connect
Data line problem Replace the data cable
The client program is not
inctall^d Install the client program (including driver installation)
The driver was not
successfully installed Temporarily shut down the protection system and reinstall the client □rogram
The remote control
no response
Low voltage, screen dims Charging the remote control
Battery is dead Charging the remote control
Remote host no
response Lost code information Re-match
Remote control
distance is short
Vletal sling part for antenna
Please hold part of the metal sling when remote control