CamFive FM Series, Quick Start Manual

Page: 17 / 19

① Adjust current to the minimum (this can effectively reduce
the impact on laser module)
② Turn off laser power supply switch
③ Turn off scanner power and the red light power in the front
panel.
④ Shut down the computer
⑤ Shut down the air switch
Please preheat 40 seconds before marking during the winter
Note: Turn off the laser power supply. Wait at least 20 se-
conds before shutting off the air switch.
Please install an air conditioner indoor if possible
1. Avoid direct eye contact with the laser light
2. Use laser only in a controlled range with warning signs.
3. Do not use machines without permission. Machines can
only be operated by trained professionals.
17
FM30/fm50 Quick Start Guide
Chapter Four: Precautions for Use
4.1 Caution for Daily Operation
3.2.2 Sequence of Shutting the Equipment Down