EMC_SPEC040_CLCR.doc
Rev. E
–
2021 10 18
50/63
Install & Operating Manual
CleanSeal V3
Door Operation for CleanSeal Exhaust CR
The door locking system allows for fast & easy access without any tools.
•
To unlock, push on both corners of the housing door
The door unlocks with an audible "click" for each lock.
•
The door will open to a stop. From this position
o
The HEPA dp-port is accessible in its storage clamps
o
The prefilter can be changed without holding the door
o
The door can be lifted out for access to the HEPA filter
•
To lock, push again on both corners of the housing door.
The door locks with an audible "click" for each lock.
PLEASE NOTE:
For installation of the door, access to filters, or any other intervention on the
housing, a minimum intervention space in front of the housing needs to be free
from obstructions of any kind.
PLEASE NOTE:
CleanSeal Exhaust wall housings (CR) can be fitted with different doors
- with or without prefilter - to suit different requirements.
A standard door can be replaced by a prefilter door at any time.
Door
Operator
Recommended
3P3
127
800
3P6
181
800
6P6
181
800
9P6
266
900
C
le
an
Se
al
Ex
h
au
st
Si
ze
s
600
Minimum Intervention Space
[mm]
click
click
