Cameron Scanner 3100, Networking Manual

Page: 19 / 37

15
Scanner 3100 Wi-Fi & Advanced Networking Guide Section 3
d.
On the Enable Wi-Fi Wake on Gesture dropdown list, select ‘Yes’ to enable the feature. To disable
the feature select ‘No’. When the Wake On Gesture feature is enabled, covering the right side of the
Scanner 3100 for a few seconds will activate a Client Access Session.
10. Click the Save button to accept the changes. The system will write the changes and reset the wireless
configuration settings. All networks will be shut down and restarted after 90 seconds.
Configure the Scanner 3100 as a Wireless Client
1.
When the Device Status screen appears, select Administration→Network
from the main toolbar above
the Status screen as shown in Figure 28 .
Figure 28 - Navigation to Network menu item
2. Click the Wi-Fi
button located on the left side toolbar. The Wi-Fi Configuration screen will appear as
shown in Figure 29 .
Figure 29 - View Wi-Fi Configuration screen
3. Click the Modify
button to change the Wi-Fi settings.