VC-5MC-M/C110H User's Manual
Page 94 of 109
Command
Syntax
Return
Value
Description
Set Frame Rate
Get Frame Rate
sfr n
gfr
OK
n
Sets the rate at which the
exposure start trigger will be
generated when the Trigger
Mode is set to Off.
Get Acquisition
Status
gast
0|1
Retrieves the internal
acquisition status.
0: The camera is not in the
process of acquiring a frame.
1: The camera is in the process
of acquiring a frame.
Set Trigger Mode
Get Trigger Mode
stm 0|1
gtm
OK
0|1
Sets the Trigger Mode.
0: Trigger Mode Off (Free run
mode)
1: Trigger Mode On
Set Trigger Source
Get Trigger Source
sts 3|10|14|18|22
gts
OK
3|10|14|18|22
Specifies a source signal when
the Trigger Mode is set to On.
3: Software
10: User Output0
14: CC1
18: Timer0 Active
22: Line0
Generate SW Trigger
gst
OK
Generates a Software trigger
signal.
Set Trigger Activation
Get Trigger Activation
sta 0|1
gta
OK
0|1
Sets the activation mode for the
selected source signal when
the Trigger Mode is set to On.
0: Falling Edge
1: Rising Edge
Set Exposure Mode
Get Exposure Mode
sem/ses 0|1
gem/ges
OK
0|1
Sets the Exposure Mode.
0: Timed
1: Trigger Width
Set Short
Exposure Mode
Get
Short Exposure Mode
ssem 0|2
gsem
OK
0|2
Sets the Short Exposure Mode.
0: Off (Normal Exposure Mode)
2: Ultra Short
Set Exposure Time
Get Exposure Time
set n
get
OK
n
Sets an exposure time.
n: Exposure time in
microseconds
Normal: 7.39
㎲
– 60 s
Ultra Short: 1.02
㎲
– 2.47
㎲
Get Exposure Offset
geo
n
Retrieves the current Exposure
Offset.
Normal: 2.47
㎲
Ultra Short: 0.00
㎲
Table 10-3 Command List #3
