SD-HD MiniZoom
– Operation Manual
SD/HD Minizoom V3
Page 2 of 6
3/2/2013
Remove power from the unit and set the rotary channel select switch and DIP switches back to their
normal required settings.
Next time power is applied to the Interface unit the camera will have the new format.
The DIP switches on the top of the interface unit must also be changed for SD or HD modes. (Visible
through the slot in the top panel). SW1 and 2 must OFF for HD and ON for SD.
DIP SWITCH >
1
2
3
4
HD 1080i /50
OFF
OFF
OFF
OFF
HD 1080i /59.94
ON
OFF
OFF
OFF
HD 720p/50
OFF
ON
OFF
OFF
HD 720p/59.94
ON
ON
OFF
OFF
SD PAL(50) 16x9
OFF
OFF
ON
OFF
SD PAL(50) 4x3
OFF
OFF
ON
ON
SD NTSC(59.94) 16x9
ON
ON
ON
OFF
SD NTSC(59.94) 4x3
ON
ON
ON
ON
Embedded Audio
The Interface box has a female
9 way ‘D’ connector on the side which allows up to four audio channels to
be embedded into the output SDI data stream.
The DIP switches on the top of the Interface Unit are used to turn the embedding on or off and to set the
audio levels. DIP switch 6 turns the audio embedding on or off.
The audio levels are set using DIP switches 4 & 5 as shown in the table below:-
Audio 9 w ‘D’ Connections
1.
Common Screen
2.
Channel 1
LEFT
XLR pin 3
3.
Channel 1
RIGHT
XLR pin 3
4.
Channel 2
LEFT
XLR pin 3
5.
Channel 2
RIGHT
XLR pin 3
6.
Channel 1
LEFT
XLR pin 2
7.
Channel 1
RIGHT
XLR pin 2
8.
Channel 2
LEFT
XLR pin 2
9.
Channel 2
RIGHT
XLR pin 2
Input Level Range
Full Scale (0dBFS) DIP Switch 4 DIP Switch 5
Professional US
+24dBu
LEFT (Off)
LEFT (Off)
Professional European +18dBu
LEFT (Off)
RIGHT (On)
Consumer High (IHF)
+12dBu
RIGHT (On)
LEFT (Off)
Consumer Low
+15dBu
RIGHT (On)
RIGHT (On)
1 2 3 4
5
6
2 3
CH1L
2 3
CH1R
2 3
CH2L
2 3
CH2R
Common
Screen
7
8
9
