Cameo WLN-2220 User Manual Download Page 42 | Manualshive

Page: 42 / 63

background image

36

Access Control Setting

This access control enables you to define access restrictions, set up protocol and IP
filters, create virtual servers, define access for special applications such as games,
and set firewall rules.

Filter

Using filter to deny or allow the users to access. Five types of filters to select:
MAC, IP Filter, URL blocking, Domain blocking and Protocol filter.

MAC Filters

MAC Filter: Enables you to allow or deny Internet access to users within the LAN
based upon the MAC address of their network interface. Click the radio button next
to Disabled to disable the MAC filter.
Disable: Disable the MAC filter function.
Allow: Only allow computers with MAC address listed in the MAC Table.
Deny: Computers in the MAC Table are denied Internet access.
MAC Table: Use this section to create a user profile which Internet access is
denied or allowed. The user profiles are listed in the table at the bottom of the page.

«
...
40
41
42
43
44
...
»

Summary of Contents for WLN-2220
































































Reviews:

No comments

Related manuals for WLN-2220

Brand: H3C Pages: 1057

Brand: A-Link Pages: 6

Brand: Amperes Pages: 8

Brand: H3C Pages: 400

Brand: Qixiang Technology Pages: 16

Brand: ZyXEL Communications Pages: 299

Brand: XNET Pages: 17

Brand: HELVAR Pages: 2

SRA311-008P8 Series

Brand: Divio Pages: 4

Brand: ZyXEL Communications Pages: 79

Husky HMG-1648EP

Brand: Ethernet Direct Pages: 16

Brand: Wave Wireless Networking Pages: 167

Brand: ZyXEL Communications Pages: 66

Brand: ADTRAN Pages: 2

Brand: Extreme Networks Pages: 51

Brand: Acces Pages: 21

Brand: Hame Pages: 37

Brand: TRENDnet Pages: 205

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands