14
MAC Filter:
MAC Filter function controls the MAC of the network devices that
are listed in this table for access authorization or denial. When MAC Filter is
enabled, by selecting the “
Enabled
” radio box, select one of two choices:
●
Only deny PCs with MAC listed below to access device
●
Only allow PCs with MAC listed below to access device
The maximum number of MAC addresses that can be stored is 50. You can
browse through the MAC address saved by selecting the drop-down box.
For any changes made in the security page, click “
Apply
” for the changes to be
effective.
3.6 Tools
Four functions are provided in this page, Backup, Restore Settings, Restore
default settings and Firmware Upgrade.
Backup Settings:
Click on “
Backup
” button, which will open a FileSave Dialog
box, where user gets to save all the current settings and configurations to a file.
Restore Settings:
Click on the “
Browse
” button to open a FileOpen Dialog box,
where user gets to select the file, which saves previous settings and
configurations. Upon selecting the saved file, click “
Restore
” and complete the
restore process when the access point re-operates after it restarts.
Restore to default settings:
Click on “
Default
” button to restore the access
point back to its manufacture default settings.
