Cameo ROOT PAR BATTERY, User Manual

Page: 18 / 176

18
DEUTSCH
ENGLISH
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
same model and software version, which could otherwise only be achieved with a suitable DMX
controller and complex programming.
--------Menu-------
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
----Slave Group----
Stand Alone
Slave
Settings
Mode
Slave
Gr 1 2.0s 1 - 15
Main display
with group number
and delay time in the
master unit
Assign the spotlight to one of 15 groups as you like. Several spotlights can also be assigned to
one group. The group number is also the factor by which the set delay time on the master unit is
multiplied (see setup example).
Mode
Slave
Master unit
Auto program 1
Delay 0.5 s
Slave Group 0
No delay
Slave Group 1
0.5s delay
Slave Group 2
1s delay
Slave Group 3
1.5s delay
Slave Group 4
2s delay
Slave Group 5
2.5s delay
Gr 1 0.5s Gr 2 0.5s Gr 3 0.5s
Gr 3 0.5s
Gr 3 0.5s
Gr 4 0.5s Gr 5 0.5s
Mode
Slave Mode
Slave Mode
Slave
Mode
Slave
Mode
Slave
Mode
Slave Mode
Slave
SYSTEM SETTINGS (Settings)
Starting from the main display, press MENU to go to the main menu. Using the  and  buttons,
now select the Settings menu option and press ENTER to confirm your selection.
--------Menu-------
DMX Address
DMX Mode
DMX Delay
Stand Alone
Slave
Settings
System Info
This will take you to the submenu for setting the submenu options (see table, use  and  to
select, press ENTER to confirm, use  and  to change the value or status, press ENTER to
confirm).
Settings
Disp Rev
= Rotates display No Display does not rotate
Yes Display rotates 180° (e.g., for overhead
installation)