IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
9
DMX
Pin Assignment
DMX cable with 3-pin XLR connectors:
DMX cable with 5-pin XLR connectors (pin 4 and 5 are not used):
Shield
2
3
1
2
3
1
1
2
3
4
5
1
2
3
4
5
Shield
DMX TERMINATORS (TERMINATING RESISTORS)
To prevent system errors, the last device in a DMX chain needs to be equipped with a terminating resistor (120 ohm, 1/4 Watt).
3-pin XLR connector with a terminating resistor: K3DMXT3
5-pin XLR connector with a terminating resistor: K3DMXT5
Pin Assignment
3-pin XLR connector:
5-pin XLR connector:
2
3
1
1
2
3
4
5
DMX ADAPTER
The combination of DMX devices with 3-pin connectors and DMX devices with 5-pin connectors in a DMX chain is possible with suitable
adapters.
Pin Assignment
DMX Adapter 5-pin XLR male to 3-pin XLR female: K3DGF0020
Pins 4 and 5 are not used.
Pin Assignment
DMX Adapter 3-pin XLR male to 5-pin XLR female: K3DHM0020
Pins 4 and 5 are not used.
TECHNICAL DATA
Model number:
CLNROLL200
Product type:
LED moving lights
Type:
LED scanners
Colour spectrum:
RGBW
Number of LEDs:
2
LED type:
10 W
Beam angle:
4°
DMX input:
XLR 3-pin male
DMX output:
XLR 3-pin female
Protocols:
USITT DMX-512
DMX mode:
2-channel, 4-channel, 11-channel, 16-channel, 19-channel
DMX Functions:
strobe, dimmer, auto-programs, TILT, PAN, programme speed, sensitivity, sound-control
PAN movement:
180°
TILT movement:
unlimited barrel rotation
Flash rate strobe:
1 – 20Hz
Standalone modes:
auto programmes, sound-control, Master/Slave mode
Controls:
Mode, Enter, Value Up, Value Down
Indicators:
LED display
Operating voltage:
100 V AC - 240 V AC, 50 - 60 Hz
Power consumption:
40W
Fuse:
F3AL 250 V
Power input:
IEC power connector male
Summary of Contents for NANOROLL 200
Page 55: ......
