21
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
Advanced slave mode:
If you wish to control the slave units in master/slave mode using one of
the
Auto
or
Loop
standalone modes, the control signal can be reproduced with a time delay of
up to 24 steps. The delay is set in the submenu item
Delay
in the relevant standalone mode; the
delay factor is set in the slave menu of the corresponding spotlight. This is a simple way to create
a running light effect with a large number of spotlights that are all the same model and have the
same software version. This is otherwise only possible using a suitable DMX controller and time-
consuming programming.
Assign the spotlights to one of up to 24 groups (plus Group 0) according to preference, whereby
several spotlights can be assigned to one group. The group number is also the factor by which the
delay time set in the master unit is multiplied.
Setup example:
SYSTEM SETTINGS (Settings)
Starting from the main display, press MENU to enter the main menu. Using UP and DOWN, select
the menu item Settings and confirm with ENTER.
