34
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
A
A
USE TV SPIGOT FOR TRUSS MOUNTING
HAZARD
: Overhead mounting requires extensive experience, including the
calculation of the limit values for load, the installation materials and regular safety
inspection of all installation materials and spotlights. If you do not have these
qualifications, do not attempt to perform an installation yourself. Refer instead to a
qualified professional.
There is a risk that devices that are incorrectly mounted and
secured may come loose and fall down. This can cause serious injury or death.
The 28 mm TV spigot previously mounted on the U-bracket can also be used for
truss mounting. Use a suitable fastener and make sure it is firmly attached. To
adjust the dispersion direction in the vertical plane, slightly loosen the clamps mounted on the
U-bracket, set the desired dispersion direction and tighten the clamps again. Secure the spotlight
to the side handle recesses using a suitable safety cable (Fig. A).
Cameo
®
is a registered brand of the Adam Hall Group.
Adam-Hall-Str. 1 · 61267 Neu-Anspach · Germany
DESIGNED AND ENGINEERED IN GERMANY. Assembled in PRC
Adam Hall assumes no responsibility or liability for the correctness, accuracy and completeness of this drawing. | Adam Hall übernimmt keine Gewähr oder Ha�ung für die Rich�gkeit, Genauigkeit und Vollständigkeit dieser Zeichnung.
1:10
Scale:
Art No. XXX
- Similar to image -
