Red Dot
DMX
CONTROL
MODE:
The Cameo PAR 56 CAN has two DMX modes to choose from, 4 channel or 6
Channel. To access the 4 Channel mode, press the mode button to show a red
dot illuminated under the first digit of the DMX address. The unit is now ready
for use in 4 channel mode
CHANNEL
VALUE
FUNCTION
CH1
000-255
RED (0-100%)
CH2
000-255
GREEN (0-100%)
CH3
000-255
BLUE (0-100%)
CH4
000-255
MASTER DIMMER (0-100%)
To access the 6 Channel mode, press the mode button to
show NO red dot under the first digit of the DMX address.
The unit is now ready for use in 6 channel mode
CHANNEL
VALUE
FUNCTION
CH1
000-255
RED (0-100%)
CH2
000-255
GREEN (0-100%)
CH3
000-255
BLUE (0-100%)
CH4
0-255
Master dimmer (0-100%)
CH5
0-16
17-255
No function
Strobe/Speed Adjust/Sound Sensitivy Adjust
(refers to channel 6)
CH6
0-31
32-95
96-159
160-223
224-255
No function
Colour mixing
RGB colour change
7 colour change
Sound control
To change from 4 channel to 6 channel mode, press ONLY the mode button repeatedly until you return to the
DMX control mode.
DAISY CHAIN CONNECTION
1) Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture
2) Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the
input connector of the next fixture consisting of a (male) 3 pin connector. Proceed to connect from the output as
stated above to the input of the following fixture
and so on.
8
9
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
FRANCAIS
DEUTSCH
ENGLISH
