Cameo CLP2D, User Manual

Page: 16 / 164

16
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
SLAVE MODE
Press the encoder to access the main menu. Rotate the encoder to select the menu item Slave
(observe left selection arrow) and confirm by pushing the encoder. Slave mode is now enabled,
and the main display is automatically displayed. Connect the slave and master unit (same model,
same software version) using a DMX cable, and activate stand alone mode on the master unit. The
slave unit will now follow the master unit.
Mode
Slave
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
Menu
DEVICE SETTINGS (Settings)
Press the encoder to access the main menu. Rotate the encoder to select the menu item Set-
tings (observe left selection arrow) and confirm by pushing the encoder. This will take you to the
submenu for setting the submenu items (see table, rotate the encoder to select, push the encoder
to confirm selection). Now select the arrow symbol for “back” at the top of the submenu. Push the
encoder and access the main menu in the same way to return to the main display.
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
Menu
Settings
Back
Wireless
Settings = Configure wireless
control (IDMX stick
optionally available)
Back
WDMX
State Back
On Wireless control enabled
Off Wireless control disabled
Signal
routing Back
Receive only W-DMX reception only
To XLR
Signal -> DMX OUT
Backup by
XLR Backup via DMX IN with W-DMX
signal interruption