Cameo CLOH5, User Manual

Page: 13 / 148

13
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
OPERATION VIA SACN PROTOCOL
Starting from the main display, press the rotary-push encoder to enter the main menu. Select the Control menu by turning and pressing the
encoder. By turning the encoder you can now select the menu item Protocol , confirm by pressing the encoder and then select sACN by
turning the encoder and confirm by pressing the encoder.
Information on the sub-menu items in the sACN menu and the relevant setting options is to be found in the table below.
SLAVE MODE
Starting from the main display, press the rotary-push encoder to enter the main menu. Select the Control menu by turning and pressing the
encoder. By turning the encoder, select the menu item Protocol , confirm by pressing the encoder and then select Slave by turning the
encoder and confirm by pressing the encoder. Connect the slave and the master unit (same model, same software version) with a DMX
cable (Master DMX OUT – Slave DMX IN) and enable the standalone mode Static on the master unit. The slave unit will now follow the
master unit.
STANDALONE OPERATION STATIC
Starting from the main display, press the rotary-push encoder to enter the main menu. Select the Control menu by turning and pressing the
Protocol sACN
Select by turning the encoder, confirm by pressing, change value or status by turning, confirm by pressing. Back with BACK.
DMX Address
Setting the DMX start address 001–512
DMX Mode Selecting the DMX mode 29ch/36ch
Universe Group Setting the Universe Group 000–255
Universe Setting the universe 001-256
IP Address Setting the IP address: 1. Set block, confirm, set 2nd block, confirm ... xxx.xxx.xxx.xxx
Subnet Mask Adjustment of the subnet mask: 1. Set block, confirm, set 2nd block, confirm ... xxx.xxx.xxx.xxx
W transmitter Activate (On) or deactivate (Off) forwarding of the DMX signal via W-DMX On
Off
Establish (Linking) or release (Unlink) a connection to other W-DMX devices. Linking
Unlink
W-DMX standard Setting the W-DMX standard (G3 / G4s) G3
G4s
DMX XLR Out Forwarding the control signal via XLR Out Activate (On) and Deactivate (Off) On
Off