Cameo AZOR S2, User Manual

Page: 20 / 147

20
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
Sensor Temperature LED xx°C / xx°F
Base xx°C / xx°F
Temperature unit °C degrees Celsius
°F degrees Fahrenheit
Fan Speed LED Fan revolutions LED xxxxRPM
Motor Fan revolutions motors xxxxRPM
Base Fan revolutions device base xxxxRPM
Operation Hours Operation Time xxxx:xx h Total operating time
LED Time xxxx:xx h LED unit operating time
Errors Error display in case of malfunction
SETUP AND INSTALLATION
HAZARD: Overhead mounting requires extensive experience, including the calculation of
the load limit values of the installation material and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to perform an installation yourself. Refer instead to a qualified professional.
There is a risk that devices that are incorrectly mounted and secured may come loose
and fall down. This can cause serious injury or death.
Thanks to its integrated rubber feet, the lamp can be positioned in a suitable location on a level
surface. Traverse installation can be achieved with the help of two Omega brackets, which are
attached to the base of the device (A). 2 x Omega brackets are included. Suitable beam clamps
are available as an option. Ensure firm connections and secure the spotlight to the securing lug
(B) with a suitable safety cable.
A
- Similar to image -
B
A