background image

EC DECLARATION OF CONFORMITY 

Product: Manoeuvring Device for Caravans
Model No: EM303A 
Manufacturer: The Ace Supply Company Ltd T/A Streetwize Accessories
Address: Unit 1, Royce Trading Estate, Ashburton Road West, Trafford Park, Manchester M17 IRY
This declaration is issued under the sole responsibility of the manufacturer.

The object of the declaration described above is in conformity with the relevant EC Directives: 

2014/53/EU RE Directive
2014/30/EC EMC Directive
2006/42/EC Machinery Directive
2011/65/EU RoHS Directive
ECE-R10 

Conformity is shown by compliance with the applicable requirements of the following standards: 

EN300 220-1
EN300 220-2
EN301 489-1
EN301 489-3
EN 62311
EN ISO 12100
ECE-R10.05

Technical Data 

Remote Control Frequency Class 1 Frequency 868 MHz <20mA
Operational Voltage 12v DC Current Consumption Average 20A maximum 100A
Power Transmitted 6.345 dBm
Area of operation Single axle caravan with a total weight up 2250kg on hard / flat surfaces
1800kg on other surfaces,
1450kg on 18% gradient
Speed approx: 9cm per second
Weight approx: 34kg 
Signed for and on behalf of: The Ace Supply Company Ltd T/A Streetwize Accessories
Place of Issue: Manchester
Date of Issue: 10/09/2019
Name: Lesley Cooper
Position: QC Manager
Signature: 

EM303A Manual AW 2019.qxp_Layout 1  23/12/2019  15:53  Page 4

Summary of Contents for emove EM303A





















Reviews: