manualshive.com logo in svg

CAME Wi-Fi PLX V, Operating And Installation Manual

Share
Download
CAME Wi-Fi PLX V Operating And Installation Manual Download Page 25

Page 

25

  - Manual 

 - FA01792-EN

  - 10/2022 © CAME S.p.A. - The contents of this manual may be changed at any time and without notice.  - Translation of the original instructions

 Maintenance

Reboot device

Back

Restore factory defaults

Demo mode: OFF

1

 Reboot device

Select to restart the device.

2

 Restore factory defaults

Select to restore all local settings to the default factory settings.

3

 DEMO mode

Select to activate or deactivate DEMO mode.

 Demo mode is designed for demonstration systems. If Demo mode is activated, you 

are disconnected from the confi gured Wi-Fi network.

 Device information

Model: PLX V WI-FI

HW version: 0.0        SW version: 0.0.0xx0-seq

s/n: 0x000000           KC: 000X00X000X000XX

Wi-Fi SSID: 

MAC address: 00:00:00:00:0X:00:XX

IP address: 000.000.00.00

GW: 000.000.00.0                           DNS: 0.0.0.0.

Device status: OK

CAMEConnect status: Connected   

Back

From here you can view the following device information.

Model
Hardware version and software version
Serial number and keycode
Wi-Fi SSID
MAC address
IP address
Gateway and DNS
Device status
CAMEConnect connection status

Summary of Contents for Wi-Fi PLX V

































Reviews:

No comments

Brands by name

Popular brands

Load more brands