AF
AF
Page
22
- Manual
FA01321 -
EN
- 03/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
ENABLING THE RADIO CONTROL
Radio frequency card
Fit the AF card into the connector on the control
board.
Before fitting the AF card, you MUST CUT OFF THE MAINS POWER SUPPLY
Additional external antenna
Disconnect the internal antenna and connect the
external one to the corresponding terminals on the
control board.
Memorizing the transmitters
You can memorize up to 16* diff erent codes/users. When the operator is idle:
1
Press and keep pressed S until....
2
0 appears on the left side of the screen. The segments of the 0 on the left side of the
screen rotate clockwise.
Release the S key.
3
Consecutively press twice the key that you want to memorize. The control unit will
BEEP to confi rm that the transmitter has been memorized.
⚠
* When you try to memorize the 17th code (or transmitter) the courtesy light flashes slowly five times to
signal that the memory is full.
Page
22
- Manual
FA01321 -
EN
- 03/2019 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructi
ons
